Gas Testing

TestOxy 2

In order to maintain EN1279 parts 2 and 3 accreditation and to ensure consistent quality levels, producers of insulated glass units need to test gas concentration levels on a regular basis.
This handheld testing device offers smaller and medium volume unit manufacturers a cost effective, accurate and easy to use measurement system. It can be used for testing Argon, Krypton, Xenon and mixed gas content.

The TestOxy 2 has been designed to give an accurate analysis of gas concentration at an affordable price. Although the testing process is invasive, it is non destructive when used on-line during manufacturing, so cuts down on waste. The test is carried out by simply inserting the probe into a sealed unit and pressing the start button. After a few seconds of calibration, the TestOxy 2 will display '00' and is ready to take a sample, then the gas percentage in the IG unit is shown, and compliance can be proven.